PRIMAalpha Groove is a high performance cellulose fibre cement sheet manufactured with sand, cement, cellulose fibre and additives. It is one of the most resistant materials there is for your exterior and interior. Great to use as a feature wall or as a 1/2 height dado line to give your wall a bit of character. It is also great to use in your laundry or in the toilet to give that v-groove character.
Manufactured to conform to the requirements AS/ NZS 2908.2:2000, it is classified as Type B, Category 3.
Environmentally friendly materials and low maintenance.
Good thermal, heat and acoustics insulation, can be used for waterproofing and fireproofing (non combustible).
PRIMAalpha Groove is 7.5 mm thick fibre cement sheet with a 2.5 mm deep, 5 mm wide V-shaped groove, at 100 mm centres, which replicates a traditional tongue and groove style panelling. It is manufactured from Portland cement, finely ground sand, softwood cellulose fibres, additives, and water. P
PRIMAalpha Groove is intended for use in internal or external applications where it is not directly exposed to sun, rain and/or snow.
It is intended for use as an external soffit and eave lining and/or internal lining - ceilings and walls.
PRIMAalpha Groove can be finished using a paint system that is compatible with fibre cement panels and appropriate for where the product has been used e.g., externally, internally in a non-wet area, or internally in a semi-wet area. IBS recommends obtaining advice from your preferred coating supplier.