Use as a barrier for retaining silt and sediment on your site to stop sediment flowing into waterways. Meets the requirements of local authorities for a primary barrier against site runoff while still allowing water to pass through.
Filters out solids while allowing water flow.
High strength woven slit-film Silt Fence.
Easy to install.
To be installed with 200mm down the side of the trench and 200mm running across the bottom of the trench, upslope. The fabric needs to be 200mm below ground vertically, and 600mm above ground level. To be supported by Y posts every 2m (when using soft wire) or 4m (when high tensile wire is used). Silt Fence clips or pins are to be used every 200mm, attaching the top of the Silt Fence to the wire.