text.skipToContent text.skipToNavigation

27 March 2020: All Mitre 10 and Mitre 10 MEGA stores are closed to the public in line with the New Zealand government's action to manage COVID-19.

Some stores will supply a limited range of essential materials to existing trade customers for essential services only. More details here.

For more information on our Covid-19 status click here.


Number 8 Holesaw Set 11 Piece

SKU: 277297 MODEL: 56010
$ 18 .98  each
Mitre 10


Suitable for wood, thin sheet metals and alloys.
Features and benefits
  • 19, 22, 30, 32, 38, 44, 51 and 64mm blades.
  • Includes two arbors and a hex key.
  • High speed steel for durability.

Buying options


This option is not available

This option is not available

Not currently available online

In support of the government’s actions around COVID-19, our online channel is temporarily closed. We apologise for the inconvenience.

Brand Name
Number 8
Model Number
Number of Pieces
Suitable to Drill
Warranty Years
1 Year Warranty
Rated 3 out of 5 by from Ok, but drill portion doesn't drill well. I found the centering drill part is very poor. Even though I was drilling into soft wood it required high amounts of pressure. The saw section did cut acceptably. If I was buying again I'd spend more money on a better version.
Date published: 2020-03-08
Rated 1 out of 5 by from Cannot defeat fibreboard Don’t waste your time or money. I should be invoicIng for both.
Date published: 2019-10-02
Rated 2 out of 5 by from yeah ok same issue as the others, drill off center but managed to get the holesaw to cut several holes in 12mm plate steel and its okay apart from burning all the paint off.
Date published: 2018-07-28
Rated 1 out of 5 by from High carbon cheese metal. Just purchased one of these and while the bit was straight... enough, the hole saw was not suitable to cut tinfoil. The teeth are worn right down after using once to cut through mm thick sheet metal. Only good in a cheese factory cutting holes in swiss cheese.
Date published: 2018-06-22
Rated 1 out of 5 by from Useless Warning, bought this and the drill bit itself was off centre, completely unusable. Have learnt my lesson with buying cheap tools, they don't work!
Date published: 2018-03-24
Rated 1 out of 5 by from Utter Junk Socket for drill bit is on an angle so there is about 5mm runout at the tip. Totally unfit for purpose. Consigned to the trash as it will cost me more to drive a 70 km round trip to return it than it is worth.
Date published: 2018-01-01
  • y_2020, m_3, d_29, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_NZ, sid_277297, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_mitre10-nz