The original Danish Oil is a blend of oils, resins & driers, formulated to produce an attractive & durable finish. The finish is Satin.
For all bare wood & joinery.
Brings out the beauty of wood & veneered surfaces.
Gives a natural open-grained low lustre finish.
Easy to maintain.
It can be mixed upto a ratio of 5:1 with Rustins Wood Dye to to produce a wide range of tinted oils.
Danish Oil contains tung oil & other special ingredients which penetrate deep into all types of timber, drying to a hard, durable & water resistant seal.. The oil primes, seals & finishes all woods, including oak, teak, mahogany, rimu & pine.
Clean brushes with Turpentine or Rustins Brush Cleaner whilst still wet. If dried on, clean brushes with Rustins Brush Restorer. Dried spills on surface should be removed with Rustins Stypit Paint & varnish remover.
Coverage (Square Metres)
Number of Coats Recommended
Recoat Drying Time (Hours)
This item is non deliverable. Careful handling is advised.