Grinders

High quality wire wheel set with non-abrasive brass finish forsofter metals. 1x 2, 1x 3inch wheel brush. 1x 2, 1x 2.5inch cupbrush. 1x1inch end brush.

Rapid Strip Disc's have a 16mm bore for use on angle grinders and are ideal for stripping and removing surface coatings.

This Jobmate 1050 Watt Angle Grinder is a great DIY tool with excellent power and a rubber over-mould grip making it easy to hold. It has a 125mm disk, 11000/min and a lock off switch.

This Jobmate Angle Grinder has a 850W motor for the DIY or casual user. It has a spindle lock with aluminium alloy gear housing and slide on/off switch. This item uses a 100mm disk and comes with a 2 year warranty.

Appropriate for hand-held angle grinders. Maximum circumferential speed: 80 m/s. For Use on stainless steel..

Suitable for applications using brushes made of steel wire. Corrosion protection provided by brass-coated wire. Bosch wire brushes have been optimised for use: oil-toughened special steel wire for universal use, brass-coated special steel wire, stainless steel wire for machining stainless steel, nylon with aluminium oxide coated abrasive for sanding down paint. Suitable with: steel/ferrous metal, alloys and non-ferrous metals.

Appropriate for straight grinders and all hand held angle grinders.

No load speed: 12,000 rpm. Full ball-bearing gear case for maximum durability. Ergonomic design for comfortable gripping. Includes: Keyless guard, multi position side handle. Supplied with inner and outer disc flange, hex key.

This 500w Angle Grinder is for the DIY consumer. This item is easy to use and comes with a 1 year warranty.

BL Motor Delivers 0-6,800 OPM, 0-13,600 SPM and 0-780 RPM for faster polishing. Selectable two rotation mode: normal mode for rough polishing and finishing mode for fine polishing. Setting up RPM in the full speed is easy by a variable speed dial. Variable speed control by trigger enables to adjust RPM during operation. Wide variety of optional accessories (pad, sponge pad, felt pad, wool pad). Easy-to grip head not only for bonnet work but for sideways work too.

Dewalt's DT43934-QZ Extreme ThinCut is made for cutting ferrous materials such as steel, iron, reinforcing iron and welds. This flat cut disc is composed of industrial grain of aluminium oxide. The manufacture of high quality material guarantees its robustness and long service life.

Dewalt's DT43933-QZ Extreme ThinCut is made for cutting ferrous materials such as steel, iron, reinforcing iron and welds. This flat cut disc is composed of industrial grain of aluminium oxide. The manufacture of high quality material guarantees its robustness and long service life.

Product performance of abrasive discs is of the highest industry standards and compliance. For general metal cutting work on stainless steel, ferrous and non-ferrous metals. Professional aluminium oxide grain designed for cordless tools to maximise life and performance.

Product performance of abrasive discs is of the highest industry standards and compliance. For general metal cutting work on stainless steel, ferrous and non-ferrous metals. Professional aluminium oxide grain designed for cordless tools to maximise life and performance.

Product performance of abrasive discs is of the highest industry standards and compliance. For general metal cutting work on stainless steel, ferrous and non-ferrous metals. Professional aluminium oxide grain designed for cordless tools to maximise life and performance.

125mm cordless angle grinder.

This 1.4m plunge saw guide rail when used with a Makita plunge saw, is a more portable option to a table saw for ripping sheet material. The guide rail interacts with the plunge saw (not included) to provide smooth, dead-on straight cuts.

Designed for surface polishing on metal, jewellery, stainless steel, aluminium, wood, plastics and ceramics. Set includes, 3 x cloth wheels: 50/75/100mm, 1 x 1/4 shaft, 1 x conical mounted point 50mm, 1 x pattern mounted point 38mm, 1 x cylindrical mounted point 38mm, 1 x mushroom mounted point 50mm.

High performance Brushless motor delivers more power, higher torque and longer run times – up to 50% longer runtime than traditional brushed motor. HiKOKI’s unique AUTO mode adjusts the speed automatically between high and low speeds depending on the load – reducing noise and vibration in no-load operation.

This angle grinder has a high performance brushless motor with variable speed function for greater control and AUTO mode that adjusts speed automatically.