This integrated LED downlight has a slim profile design (W:150mm D:45mm). Uses 80% less energy than an incandescent light bulb with an equivalent lumen output. Colour temperature warm white (3000k). It has a beam angle of 120 degrees.
LED DRIVER LOCATION:
• The LED Driver (transformer) must be installed above the building insulation material.
• LED Driver must be a minimum of 50mm away from any part of the luminaire at all times,
as noted in the diagram below.
• We recommend mounting the LED Driver on the nearest joist, beam, rafter or ceiling
batten above the level of the building insulation.