Bondall Garage & Factory floor protector provides floors with a tough hard wearing film that's incredibly durable with good abrasion resistance. Formulated on a modified polyurethane alkyd resin, it also contains Slip Guard, an additive which helps reduce the danger of slipping. This product dries to a pleasant low satin sheen, and is intended for use on concrete floors but can also be used on brick, stone and timber if required.
For interior/exterior use.
Covers approximately 10 square metres per litre.
Wait 6 hours between coats.
Safe for foot traffic 24 hours after final coat.
Recommended minimum of 2 coats.
Dilute first coat with 20% mineral turpentine for penetration & adhesion.
Note that drying times are only an indicator of minimum drying time - in low temperatures and in high humidity, it will take longer for your paint or stain to dry.